These instructions are for one-way draw vertical blinds only. (One-Way Draw is when vertical blinds are drawn open and all of the vanes stack on the same side of the head rail as the controls.)
To shorten the length of the hanging, looped draw string on your vertical blinds, please follow the instructions below. You can make this adjustment with your blind hanging and the vanes attached.
Look inside the head rail and find the vane carrier where the cord ends in a knot.Hold that carrier and pull out the excess cord until the draw reaches the desired height.
Cut off the excess cord.
Tie a knot.
Operate the blind to ensure the new cord length is satisfactory and everything operates smoothly.
If you need to purchase new cord for your vertical blinds, please click here.